Electronic Infrared Tap Satin Stainless Steel

Electronic Infrared Tap Satin Stainless Steel.

Touch Free Tap for ultimate hygiene prevents cross contamination.

Quality chrome plated brass or stainless steel.

Water Supply: Single inlet cold or pre-mixed a TMV2 or TMV3 thermostatic mixing valve is recommended for premixed applications.

Flow rate: 6 litres/minute (4 litres/ minute also available please specify).

3/8" BSP water supply connector.

Power Source: Plug-in 9 Volt transformers or 9 Volt Battery (with low battery warning).

Tap settings including optional hygiene flush can be adjusted manually or by using remote control (DB51).

Mandatory Hygiene Flush feature can be specified to combat Legionella.

2 year manufacturer's warranty.

WRAS approval pending.

Maximum water temperature 70�C.

Operating pressure 1.0 - 8.0 bar (14.5 - 116 PSI).

DB 225 comes complete with a DB 80 Battery Backup device.

Min-Max thickness: 2-27mm.

Water supply: Single - cold or premixed.

Mandatory Hygiene Flush is available - can be set to 12,24 or 48 Hour intervals - optional extra & must be specified when ordering.

Maximum flow rate of taps is 6 litres/minute as a standard - other options are available on request.

Counter Hole: diameter 28-34mm.

Minimum/maximum thickness: 2-27mm.

Power connections: tap: male / power source: female.